Wayne Dalton Garage Door Replacement Panels

If your garage door has been damaged or is simply showing its age, replacing the panels can be a great way to restore its appearance and functionality. Wayne Dalton is a leading manufacturer of garage doors and replacement panels, and their products are known for their durability, quality, and style. In this article, we will provide you with a step-by-step guide on how to replace Wayne Dalton garage door replacement panels.

Tools and Materials You Will Need:

New Wayne Dalton garage door replacement panels
Screwdriver
Drill
Level
Measuring tape
Safety glasses
Gloves

Step-by-Step Guide:

1. Safety First:

Before you begin, put on your safety glasses and gloves. Make sure the garage door is closed and the power is disconnected.

2. Remove the Damaged Panel:

Locate the damaged panel and use a screwdriver to remove the screws that hold it in place. Carefully lift the panel away from the door.

3. Measure and Cut the New Panel:

Measure the opening where the damaged panel was located. Transfer these measurements to the new panel and cut it to size using a saw.

4. Prepare the New Panel:

If the new panel has any pre-drilled holes, use a drill to create matching holes in the door frame. If there are no pre-drilled holes, you will need to mark and drill the holes yourself.

5. Install the New Panel:

Position the new panel in the opening and align it with the holes. Insert the screws and tighten them securely. Use a level to ensure that the panel is installed straight.

6. Repeat for Additional Panels:

If you need to replace multiple panels, repeat steps 2-5 for each panel.

7. Reconnect the Power and Test:

Once all of the new panels are installed, reconnect the power to the garage door and test it to make sure it is operating correctly.

Tips:

To ensure a proper fit, make sure the new panel is the same size and thickness as the damaged panel. If you are not comfortable replacing the panels yourself, it is recommended to hire a professional.