Side Mount Garage Door Opener Installation

Installing a side mount garage door opener is a great way to add convenience and security to your home. Side mount openers are mounted on the side of the garage door, rather than on the ceiling, making them a good choice for garages with limited headroom. They are also a good option for homes with a traditional or decorative garage door that you don't want to alter.

Installing a side mount garage door opener is a relatively straightforward process, but it does require some basic electrical and mechanical skills. If you are not comfortable working with electricity or power tools, it is best to hire a qualified electrician or garage door technician to do the installation for you.

Tools and Materials You Will Need

* Side mount garage door opener * Mounting brackets * Lag bolts * Drill * Socket wrench * Wire strippers * Electrical tape * Safety glasses * Gloves

Step-by-Step Instructions

1. Prepare the garage door. Before you begin installing the opener, you need to remove the old opener and any brackets or hardware that is attached to the door. You may also need to drill new holes in the door for the new opener's mounting brackets. 2. Mount the brackets. The mounting brackets should be attached to the side of the garage door, about 6 inches from the top of the door. Use lag bolts to secure the brackets to the door. 3. Install the opener. The opener should be attached to the mounting brackets using the bolts that came with the opener. Make sure that the opener is level and that the chain or belt is properly attached to the door. 4. Wire the opener. The opener must be wired to a power source and to the door's limit switches. The limit switches tell the opener when the door is fully open and fully closed. 5. Program the opener. Once the opener is wired, you need to program it to work with your remote control. The programming instructions will vary depending on the make and model of the opener.

Tips

* If you are not sure how to wire the opener, consult an electrician. * Make sure that the opener is properly aligned with the door. If the opener is not aligned correctly, the door may not open or close properly. * Test the opener before you put the door back on. This will ensure that the opener is working properly and that the door is opening and closing smoothly.

Safety Precautions

* Always wear safety glasses and gloves when working with power tools. * Be careful when drilling holes in the garage door. Do not drill into the door's springs or other moving parts. * Do not attempt to override the opener's safety features.