Reprogramming A Liftmaster Garage Door Keypad

Losing your Liftmaster garage door keypad remote can be a frustrating experience, especially if you don't have a spare. Fortunately, reprogramming a Liftmaster garage door keypad is a relatively simple process that can be done in a few minutes.

Before you begin, you will need to gather a few items:

A ladder
A Phillips head screwdriver
The new keypad remote

Once you have all of your materials, you can begin the reprogramming process.

1. Locate the keypad. The keypad is typically located on the outside of your garage door, near the door opener. 2. Remove the keypad cover. Use the screwdriver to remove the screws that hold the keypad cover in place. 3. Locate the learn button. The learn button is usually a small, black button located on the inside of the keypad cover. 4. Press and hold the learn button. Continue holding the button until the LED light on the keypad begins to flash. 5. Enter the new code. Use the keypad to enter the new code that you want to use to open your garage door. 6. Press the enter button. The LED light on the keypad will stop flashing and the new code will be programmed. 7. Replace the keypad cover. Use the screwdriver to replace the screws that hold the keypad cover in place. 8. Test the new code. Use the new keypad to open your garage door. The door should open smoothly and without any problems.

If you have any problems reprogramming your Liftmaster garage door keypad, you can contact Liftmaster customer service for assistance.