Reprogram Genie Garage Door Remote

Genie garage door openers are some of the most popular garage door openers on the market. They're known for their reliability and ease of use. However, if you've lost your Genie remote or it's stopped working, you'll need to know how to reprogram a Genie garage door remote.

The process of reprogramming a Genie garage door remote is relatively simple. Just follow these steps:

1. **Clear the existing codes from the garage door opener.** To do this, press and hold the "Program" button on the garage door opener for about 5 seconds. The LED will flash rapidly, indicating that the codes have been cleared.

2. **Put the remote control into programming mode.** To do this, press and hold the two outer buttons on the remote control simultaneously for about 5 seconds. The LED on the remote control will flash rapidly, indicating that the remote is in programming mode.

3. **Press the "Program" button on the garage door opener.** The LED on the garage door opener will flash slowly, indicating that the garage door opener is ready to receive a new code.

4. **Press the button on the remote control that you want to program.** The LED on the garage door opener will flash rapidly, then turn off. This indicates that the remote has been successfully programmed.

5. **Repeat steps 2-4 for each additional remote that you want to program.**

Once you have programmed all of the remotes that you want, press the "Program" button on the garage door opener again to exit programming mode. The LED will stop flashing.