Reprogram Clicker Garage Door Opener

Reprogramming a clicker garage door opener is a relatively simple process that can be completed in a few minutes. By following the steps below, you can easily reprogram your clicker to work with your garage door opener.

Step 1: Gather Your Materials

You will need the following materials to reprogram your clicker garage door opener:

Your clicker garage door opener
A ladder
A screwdriver

Step 2: Locate the Learn Button on Your Garage Door Opener

The learn button on your garage door opener is typically located on the back or side of the unit. It is usually a small, black button with the word "learn" or "program" printed next to it.

Step 3: Position the Ladder and Climb Up

Place the ladder next to your garage door opener and climb up to reach the learn button.

Step 4: Press and Hold the Learn Button

Press and hold the learn button for 5 seconds. The LED light on the garage door opener will begin to flash.

Step 5: Press the Button on the Clicker

Once the LED light on the garage door opener is flashing, press the button on the clicker that you want to program. Hold down the button for 2 seconds.

Step 6: Release the Buttons

Release the learn button on the garage door opener and the button on the clicker.

Step 7: Test the Clicker

Climb down the ladder and press the button on the clicker to test if it has been programmed correctly. The garage door should open or close when you press the button.

Step 8: Repeat for Additional Clickers

If you have multiple clickers that you want to program, repeat steps 4-7 for each clicker.

Tips

Here are a few tips for reprogramming a clicker garage door opener:

Make sure that the batteries in the clicker are fresh.
If you are having trouble programming the clicker, try moving the ladder to a different location and trying again.
If you have any questions, you can always consult the user manual for your garage door opener.