Replace Garage Door Extension Spring

Replacing a garage door extension spring can be a daunting task, but it is one that is well within the reach of most do-it-yourselfers. With a little preparation and the right tools, you can save yourself the cost of hiring a professional.

Safety First

Before you begin, it is important to take some safety precautions. 1.

Disconnect the garage door opener.

This will prevent the door from opening or closing while you are working on it. 2.

Secure the door.

Once the opener is disconnected, you need to make sure that the door is secure so that it does not fall on you. You can do this by placing a 2x4 or other sturdy object under the door. 3.

Wear gloves and safety glasses.

This will protect your hands and eyes from any flying debris.

Tools and Materials

You will need the following tools and materials to replace a garage door extension spring: * New extension spring * Socket wrench * Screwdriver * Pliers * Ladder * Safety glasses * Gloves

Steps

Locate the extension spring.

The extension spring is located on the side of the garage door, above the track. It is connected to the door by a series of pulleys and cables. 2.

Remove the tension from the spring.

Using a socket wrench, loosen the nuts that hold the spring in place. Be careful not to remove the nuts completely, as this could cause the spring to fly off. 3.

Detach the spring.

Once the tension is released, you can detach the spring from the door. Be careful not to drop the spring, as it is heavy. 4.

Install the new spring.

Attach the new spring to the door in the same way that the old spring was attached. Be sure to tighten the nuts securely. 5.

Reconnected the opener.

Once the new spring is installed, you can reconnect the garage door opener.

Tips

* If you are not comfortable replacing a garage door extension spring yourself, you can hire a professional to do it for you. * Extension springs are under a lot of tension, so it is important to be careful when working with them. * If you are not sure how to replace a garage door extension spring, consult the manufacturer's instructions or watch a video tutorial online. * Replacing a garage door extension spring can be a time-consuming task, so be sure to set aside plenty of time to complete the job. With a little preparation and the right tools, you can replace a garage door extension spring yourself and save yourself the cost of hiring a professional.