Repairing A Garage Door Spring

## Repairing A Garage Door Spring

Garage door springs are an essential part of the system, providing the power to lift and lower the door. However, over time, springs can wear out or break, leading to problems with the door's operation.

If you suspect that your garage door spring needs repair, it is best to call a professional. However, if you are confident in your DIY skills and have the proper tools, you can attempt the repair yourself. Here is a step-by-step guide on how to repair a garage door spring.

### Step 1: Safety First

Before you begin any work on your garage door, make sure to disconnect the power to the door opener. This will prevent the door from accidentally opening or closing while you are working.

### Step 2: Identify the Broken Spring

Once the power is disconnected, locate the broken spring. The springs are typically located on either side of the door, above the tracks. If one of the springs is broken, you will be able to see a gap in the coil.

### Step 3: Remove the Broken Spring

To remove the broken spring, you will need to use a pair of spring pliers. Grip the spring with the pliers and carefully pull it off the shaft. Be careful not to let the spring fly off, as it could cause injury.

### Step 4: Install the New Spring

Take the new spring and slide it onto the shaft. Use the spring pliers to tighten the spring until it is secure. Be sure not to overtighten the spring, as this could cause it to break.

### Step 5: Reconnect the Power

Once the new spring is installed, reconnect the power to the door opener. Test the door to make sure that it is working properly.

### Tips for Repairing Garage Door Springs

Here are a few tips to help you repair garage door springs safely and effectively:

Always disconnect the power to the door opener before working on the springs.
Inspect the springs regularly for signs of wear or damage.
Replace both springs at the same time, even if only one spring is broken.
Use the proper tools for the job.
Be careful not to overtighten the springs.
If you are not confident in your DIY skills, call a professional to repair the springs.