Program Genie Remote Garage Door Opener

Genie is a leading manufacturer of garage door openers, and their remotes are known for their reliability, durability, and ease of use. If you need to program a new Genie remote to your garage door opener, follow these simple steps.

Gather Your Materials

Before you begin, you will need the following materials:

A Genie remote control

The garage door opener's manual

A ladder (if necessary)

Prepare the Remote Control

1. Open the battery compartment of the remote control and insert the batteries according to the diagram. 2. Close the battery compartment and press any button on the remote to make sure it is working. 3. Hold down the "Program" button on the remote control for 3 seconds. The LED light on the remote will start to flash.

Prepare the Garage Door Opener

1. Locate the "Learn" button on the garage door opener. It is usually located on the back or side of the unit. 2. Press and hold the "Learn" button for 3 seconds. The LED light on the garage door opener will start to flash.

Pair the Remote Control and Garage Door Opener

1. Bring the remote control within 10 feet of the garage door opener. 2. Press and hold the desired button on the remote control. 3. After a few seconds, the LED light on the remote control and the garage door opener will stop flashing and turn solid. This indicates that the remote control has been successfully programmed to the garage door opener.

Test the Remote Control

1. Press the button on the remote control to open the garage door. 2. The garage door should open or close smoothly. 3. Repeat steps 1 and 2 to test other buttons on the remote control.