Learn Button On Garage Door Opener Liftmaster

If you're having trouble getting your LiftMaster garage door opener to learn a new remote, there are a few things you can try.

First, make sure that the opener is in "learn" mode. To do this, press and hold the "learn" button on the opener for 3 seconds. The LED light on the opener will begin to flash slowly.

Next, press and hold the button on the new remote that you want to program. The LED light on the opener will flash rapidly. Once the LED light stops flashing, the remote has been programmed.

If you're still having trouble, there are a few other things you can try:

Make sure that the batteries in the new remote are fresh.
Try programming the remote from a closer distance to the opener.
If you're programming a multi-button remote, make sure that you're pressing the correct button.

If you've tried all of these things and you're still having trouble, you may need to contact LiftMaster customer support.

Troubleshooting Tips

If you're having trouble programming a new remote to your LiftMaster garage door opener, there are a few things you can try:

Make sure that the opener is in "learn" mode. To do this, press and hold the "learn" button on the opener for 3 seconds. The LED light on the opener will begin to flash slowly.
Press and hold the button on the new remote that you want to program. The LED light on the opener will flash rapidly. Once the LED light stops flashing, the remote has been programmed.
If you're still having trouble, try programming the remote from a closer distance to the opener.
If you're programming a multi-button remote, make sure that you're pressing the correct button.
Make sure that the batteries in the new remote are fresh.

If you've tried all of these things and you're still having trouble, you may need to contact LiftMaster customer support.

Additional Information

Here are some additional things to keep in mind when programming a new remote to your LiftMaster garage door opener:

You can program up to 16 remotes to a single opener.
If you lose a remote, you can delete it from the opener's memory by pressing and holding the "learn" button for 6 seconds.
If you have any other questions about programming a remote to your LiftMaster garage door opener, you can consult the user manual or contact LiftMaster customer support.