How To Wind Garage Door Springs

Garage door springs are an essential part of your garage door system. They help to lift and lower the door, and they also provide tension to keep the door in place. Over time, springs can wear out and need to be replaced. If you're handy, you can save money by winding your own garage door springs. Here's a step-by-step guide on how to do it.

Step 1: Gather your materials

You will need the following materials to wind garage door springs:

New garage door springs
Winding bars
Safety glasses
Gloves

Step 2: Safety first

Before you start winding garage door springs, it's important to take some safety precautions. Wear safety glasses and gloves to protect yourself from flying debris. Also, make sure that the garage door is closed and the power is turned off.

Step 3: Remove the old springs

Use winding bars to remove the old springs. To do this, insert the winding bars into the holes on the ends of the springs. Then, turn the winding bars clockwise to loosen the springs. Once the springs are loose, you can remove them.

Step 4: Install the new springs

To install the new springs, simply reverse the process of removing the old springs. Insert the winding bars into the holes on the ends of the springs, and then turn the winding bars counterclockwise to tighten the springs. Make sure that the springs are tight enough to hold the door in place, but not so tight that they're difficult to open.

Step 5: Test the door

Once the new springs are installed, test the door to make sure that it's working properly. Open and close the door several times to make sure that it moves smoothly and that there are no squeaks or other noises.

Troubleshooting

If you're having trouble winding garage door springs, there are a few things you can try:

Make sure that the winding bars are inserted into the holes on the ends of the springs.
Turn the winding bars slowly and evenly.
If the springs are too tight, you can use a pair of pliers to loosen them.
If the springs are too loose, you can use a pair of pliers to tighten them.

Conclusion

Winding garage door springs is not a difficult task, but it's important to take some safety precautions before you start. By following these steps, you can save money by winding your own garage door springs.