How To Reset My Liftmaster Garage Door Opener

If your LiftMaster garage door opener is not working properly, you may need to reset it. Resetting the opener will erase all of the programmed settings, so you will need to reprogram the remote controls and keypad after you reset it. Here are the steps on how to reset your LiftMaster garage door opener:

1. **Locate the reset button.** The reset button is usually located on the back or side of the motor unit. It is a small, red button that is recessed into the housing.

2. **Press and hold the reset button.** Use a pen or a paperclip to press and hold the reset button for about 10 seconds. The LED lights on the motor unit will flash while the opener is resetting.

3. **Release the reset button.** Once the LED lights stop flashing, release the reset button. The opener is now reset.

4. **Reprogram the remote controls and keypad.** Once the opener is reset, you will need to reprogram the remote controls and keypad. To program a remote control, press and hold the remote control button until the LED light on the motor unit flashes. Then, release the remote control button. To program the keypad, enter the desired four-digit code followed by the # key. The LED light on the motor unit will flash to confirm that the code has been programmed.

5. **Test the opener.** Once the remote controls and keypad are reprogrammed, test the opener to make sure it is working properly. Press the remote control button or enter the code on the keypad to open and close the door.

If you are still having problems with your LiftMaster garage door opener after resetting it, you may need to contact a qualified technician for assistance.