How To Reset My Garage Door Opener

If your garage door opener is not working properly, resetting it may be the solution. Here are the steps on how to reset your garage door opener:

Step 1: Locate the reset button

The reset button is usually located on the motor unit of the garage door opener. It may be a small red button or a switch. If you can't find the reset button, consult your garage door opener's manual.

Step 2: Press and hold the reset button

Once you have found the reset button, press and hold it for 5-10 seconds. The garage door opener will reset and the lights on the motor unit will flash.

Step 3: Release the reset button

Once the lights on the motor unit have stopped flashing, release the reset button. The garage door opener is now reset.

Step 4: Reprogram the remote controls

Once you have reset the garage door opener, you will need to reprogram the remote controls. To do this, press and hold the programming button on the motor unit. Then, press and hold the button on the remote control that you want to program. The lights on the motor unit will flash when the remote control is programmed.

Step 5: Test the garage door opener

Once you have reprogrammed the remote controls, test the garage door opener to make sure it is working properly. Press the button on the remote control and the garage door should open and close.

Additional tips

If you are still having problems with your garage door opener, you may need to call a qualified technician. Here are some additional tips that may help you troubleshoot the problem:

Check the batteries in the remote controls.
Make sure that the sensors on the sides of the garage door are aligned properly.
Lubricate the moving parts of the garage door opener.

By following these steps, you should be able to reset your garage door opener and get it working properly again.