How To Reset My Chamberlain Garage Door Opener

How to Reset My Chamberlain Garage Door Opener

If your Chamberlain garage door opener is not working properly, you may need to reset it. Resetting your opener will erase all of the programmed settings, so you will need to reprogram it after you reset it. There are two ways to reset your Chamberlain garage door opener: using the reset button or using the remote control. Here are the instructions for both methods:

Using the Reset Button

1. Locate the reset button on the back of the motor unit. It is usually a small, red button recessed into the housing. 2. Press and hold the reset button for 10 seconds. The LED light on the motor unit will flash rapidly while the opener is resetting. 3. Release the reset button and wait for the LED light to stop flashing. This may take a few seconds. 4. The opener is now reset. You will need to reprogram it before you can use it again.

Using the Remote Control

1. Press and hold the remote control button that you want to program. 2. While holding the button, press the reset button on the back of the motor unit. 3. Release both buttons. 4. The remote control is now programmed. You can repeat this process to program additional remote controls.

Tips

Here are a few tips for resetting your Chamberlain garage door opener:

If you are having trouble resetting your opener, you can try disconnecting it from power for a few minutes and then reconnecting it.
If you have lost the remote control for your opener, you can purchase a new one from Chamberlain.
If you are still having problems with your opener after you reset it, you may need to contact a qualified technician for assistance.