How To Reprogram Craftsman Garage Door Remote

Losing your garage door remote can be a hassle, but it's not the end of the world. You can easily reprogram a new remote to work with your door. Here's how to do it:

1. Gather your materials

You will need the following materials:

* A new Craftsman garage door remote * A ladder * A screwdriver

2. Locate the learn button on your garage door opener

The learn button is usually located on the back or side of the garage door opener. It is typically a small, black button with the word "learn" printed on it.

3. Press and hold the learn button

Press and hold the learn button for 5 seconds. The LED light on the garage door opener will start to blink.

4. Press the button on the new remote

Press and hold the button on the new remote for 5 seconds. The LED light on the garage door opener will stop blinking and the remote will be programmed.

5. Test the remote

Press the button on the new remote to open and close the garage door. If the door opens and closes, the remote has been programmed successfully.

6. Repeat for additional remotes

If you have additional remotes that you want to program, repeat steps 3-5 for each remote.

Troubleshooting

If you are having trouble programming your remote, try the following troubleshooting tips:

* Make sure that the batteries in the remote are fresh. * Make sure that the learn button on the garage door opener is pressed for 5 seconds. * Make sure that the button on the new remote is pressed for 5 seconds. * If you are still having trouble, consult the user manual for your garage door opener.