How To Replace Torsion Spring Garage Door

A torsion spring is a type of spring that is used to counterbalance the weight of a garage door. It is located above the door opening, and it is attached to the door's torsion bar. When the door is opened, the spring is wound up, and when the door is closed, the spring unwinds, helping to lift the door.

Torsion springs can last for many years, but they can eventually wear out and need to be replaced. If you notice that your garage door is becoming difficult to open or close, or if it is making a strange noise, it may be time to replace the torsion spring.

Replacing a torsion spring is a job that can be done by a DIYer with some experience. However, it is important to note that torsion springs are under a lot of tension, and they can be dangerous if they are not handled properly. If you are not comfortable working with torsion springs, it is best to hire a professional to do the job.

Here are the steps on how to replace a torsion spring garage door:

Gather your tools and materials. You will need a new torsion spring, a pair of safety glasses, a pair of gloves, a socket wrench, a drill, and a screwdriver.
Safety first! Before you start working on the torsion spring, make sure that the door is closed and that the power to the garage door opener is turned off.
Locate the torsion spring. It is located above the door opening, and it is attached to the door's torsion bar.
Remove the old torsion spring. Use the socket wrench to loosen the bolts that hold the spring in place. Once the bolts are loose, carefully remove the spring from the torsion bar.
Install the new torsion spring. Place the new spring on the torsion bar, and tighten the bolts to secure it in place.
Adjust the tension on the spring. Use the drill to adjust the tension on the spring. The tension should be adjusted so that the door opens and closes smoothly.
Reconnect the power to the garage door opener. Once the spring is installed and adjusted, reconnect the power to the garage door opener.
Test the door. Open and close the door several times to make sure that it is working properly.

Replacing a torsion spring garage door is not a difficult job, but it is important to take safety precautions. If you are not comfortable working with torsion springs, it is best to hire a professional to do the job.