How To Replace Garage Door Weather Stripping

Garage door weather stripping is an important part of your home's insulation. It helps to keep out drafts, dust, and moisture, and can also help to reduce noise. Over time, weather stripping can become worn or damaged, and it will need to be replaced. Replacing weather stripping is a relatively simple task that can be done in a few hours.

To replace the weather stripping on your garage door, you will need the following materials:

New weather stripping
A utility knife
A screwdriver
A hammer
A tape measure

Once you have gathered your materials, you can begin the process of replacing the weather stripping. Here are the steps:

1. Start by removing the old weather stripping. Use a utility knife to carefully cut along the edge of the weather stripping, taking care not to damage the door itself. Once you have cut all the way around the door, use a screwdriver to remove the nails or screws that are holding the weather stripping in place.

2. Measure the length of the new weather stripping. Cut the new weather stripping to the correct length, using a utility knife or scissors. Be sure to cut the weather stripping slightly longer than the length of the door, so that you can trim it to fit.

3. Install the new weather stripping. Start by attaching the weather stripping to the top of the door. Use a nail or screw to secure the weather stripping in place. Then, work your way down the sides of the door, attaching the weather stripping to the door frame. Be sure to pull the weather stripping taut as you attach it, so that it will create a tight seal.

4. Trim the weather stripping. Once you have attached the weather stripping to the door, use a utility knife to trim any excess material. Be sure to cut the weather stripping flush with the edge of the door.

5. Test the weather stripping. Once you have trimmed the weather stripping, test it to make sure that it is creating a tight seal. Close the garage door and look for any gaps between the weather stripping and the door frame. If you find any gaps, adjust the weather stripping as needed.

Replacing garage door weather stripping is a simple task that can be done in a few hours. By following these steps, you can help to keep your home insulated and protected from the elements.