How To Replace Garage Door Motor

If your garage door opener is acting up, it could be a sign that the motor needs to be replaced. Replacing a garage door motor is a relatively simple DIY project that can be completed in a few hours. Here's a step-by-step guide to help you get started:

Step 1: Safety First

Before you begin, make sure to disconnect the power to your garage door opener. You can do this by flipping the circuit breaker or removing the fuse that powers the opener. Once the power is disconnected, you can begin removing the old motor.

Step 2: Remove the Old Motor

The old motor is typically mounted to the ceiling of your garage. To remove it, you will need to disconnect the wires that are connected to the motor. Once the wires are disconnected, you can unbolt the motor from the ceiling and remove it.

Step 3: Install the New Motor

Once the old motor is removed, you can install the new motor. To do this, you will need to bolt the new motor to the ceiling and connect the wires that are connected to the motor. Once the wires are connected, you can turn the power back on to your garage door opener.

Step 4: Test the New Motor

Once the power is turned back on, you can test the new motor by pressing the button on the remote control. The garage door should open and close smoothly. If the garage door does not open or close, check the wiring to make sure that it is connected properly.