How To Replace A Torsion Spring Garage Door

Torsion springs are found on garage doors to counterbalance the weight of the door and make it easier to open and close. If a torsion spring breaks, it can be dangerous to operate the garage door, so it's important to replace it as soon as possible.

Replacing a torsion spring is a job that can be done by a DIYer with some experience. However, it's important to take safety precautions and follow the instructions carefully. You'll need some tools to replace a torsion spring, including a socket wrench, a screwdriver, and a pair of pliers.

Before you start working on the garage door, make sure that the power is turned off. Then, open the door and remove the safety release cable.

The next step is to remove the old torsion spring. To do this, you'll need to loosen the bolts that hold the spring in place. Once the bolts are loose, you can carefully remove the spring.

Now it's time to install the new torsion spring. To do this, you'll need to first wind the spring onto the torsion shaft. Once the spring is wound, you can tighten the bolts that hold it in place.

The final step is to reconnect the safety release cable and turn the power back on. Once the power is on, you can test the garage door to make sure that it's working properly.

Here are some additional tips for replacing a torsion spring:

* Make sure that the new torsion spring has the same size and tension as the old spring.

* Replace both torsion springs at the same time, even if only one spring is broken.

* Use caution when working with torsion springs, as they can be dangerous if they're not properly handled.

* If you're not comfortable replacing a torsion spring yourself, you can hire a professional to do it for you.