How To Realign Garage Door

A garage door is a large, motorized door that opens and closes to allow vehicles to enter and exit the garage. Over time, garage doors can become misaligned, causing them to open and close unevenly. This can be a nuisance, and it can also lead to damage to the door or the garage itself. If your garage door is misaligned, you can realign it yourself with a few simple tools. Read on for step by step guide.

1. Gather Your Tools

You will need the following tools to realign your garage door:

A level
A tape measure
A wrench
A screwdriver
A hammer

2. Check the Door's Alignment

Before you begin realigning the door, you need to check its alignment to determine how much adjustment is needed. Open the door and position the level against the bottom edge of the door. If the door is properly aligned, the bubble in the level will be centered. If the bubble is not centered, the door is misaligned and needs to be adjusted.

3. Adjust the Door's Height

If the door is not level, you need to adjust its height. To do this, locate the bolts that connect the door to the track. Loosen the bolts on the side of the door that is too high. Raise or lower the door until it is level, then tighten the bolts.

4. Adjust the Door's Side-to-Side Position

If the door is not centered in the opening, you need to adjust its side-to-side position. To do this, locate the bolts that connect the door to the track. Loosen the bolts on the side of the door that is too far out. Move the door until it is centered in the opening, then tighten the bolts.

5. Adjust the Door's Travel Limits

The door's travel limits determine how far the door opens and closes. If the door is not opening or closing all the way, you need to adjust the travel limits. To do this, locate the limit switches on the door opener. The limit switches are usually located on the track or on the door itself. Loosen the bolts on the limit switches, then adjust the switches until the door opens and closes all the way.

6. Test the Door

Once you have made all of the adjustments, test the door to make sure that it is functioning properly. Open and close the door several times to check that it is aligned correctly and that it is opening and closing all the way. If the door is still not functioning properly, you may need to consult a qualified technician.