How To Put Garage Door Back On Track

A garage door is a large, heavy object that can be difficult to move, especially if it has come off its track. However, with the right tools and a little know-how, you can put your garage door back on track relatively easily. Here are the steps you need to follow:

1. Safety first

Before you begin, it is important to take some safety precautions. First, make sure that the garage door is disconnected from the power source. This will prevent the door from opening or closing while you are working on it. Second, wear gloves and safety glasses to protect yourself from any sharp edges or flying debris. Finally, have a helper on hand to assist you with lifting the door.

2. Locate the rollers

The first step is to locate the rollers that have come off the track. These rollers are usually made of nylon or steel and are attached to the bottom of the garage door. Once you have located the rollers, you need to determine which side of the track they have come off.

3. Lift the door

Once you know which side of the track the rollers have come off, you need to lift the door so that you can access the rollers. To do this, have your helper hold the door open while you insert a pry bar between the bottom of the door and the floor. Then, use the pry bar to lift the door until the rollers are clear of the track.

4. Reattach the rollers

Once the rollers are clear of the track, you need to reattach them to the track. To do this, simply slide the rollers back onto the track and make sure that they are securely in place. Once the rollers are reattached, you can lower the door and reconnect it to the power source.

5. Test the door

Once the door is reattached, you need to test it to make sure that it is working properly. To do this, simply open and close the door a few times. If the door opens and closes smoothly, then you have successfully put it back on track.