How To Program Remote Control For Genie Garage Door Opener

### Step 1: Gather Your Materials - Genie garage door opener - Remote control - Ladder ### Step 2: Locate the Learn Button The Learn button is usually located on the back of the garage door opener. It is a small, black button with a light next to it. ### Step 3: Position the Ladder Place the ladder under the garage door opener. Make sure the ladder is sturdy and stable. ### Step 4: Climb the Ladder Climb the ladder and stand on the platform. Be careful not to touch the garage door opener or any wires. ### Step 5: Press the Learn Button Press and hold the Learn button for 5 seconds. The light next to the button will start to flash. ### Step 6: Press the Remote Control Button Within 30 seconds of pressing the Learn button, press the button on the remote control that you want to program. The light next to the Learn button will stop flashing and stay lit. ### Step 7: Test the Remote Control Press the button on the remote control to see if it opens the garage door. If the door does not open, repeat steps 5 and 6. ### Step 8: Repeat for Additional Remotes If you want to program additional remotes, repeat steps 5 and 6 for each remote. ### Troubleshooting Tips - If the light next to the Learn button does not flash when you press the button, check the batteries in the remote control. - If the garage door does not open when you press the button on the remote control, make sure that the door is not obstructed. - If you are still having problems programming the remote control, contact Genie customer service.