How To Program Liftmaster Keypad For Garage Door Opener

LiftMaster is one of the leading manufacturers of garage door openers and accessories. Their keypads are a convenient way to open and close your garage door without having to use a remote control. Programming a LiftMaster keypad is a simple process that can be completed in just a few minutes.

Before you begin, you will need the following:

A LiftMaster keypad
A ladder
A Phillips head screwdriver

Once you have gathered your materials, follow these steps to program your LiftMaster keypad:

Mount the keypad. The keypad can be mounted on the wall next to your garage door or on the inside of your garage. Use the included screws to secure the keypad in place.
Connect the wires. The keypad comes with two wires, a red wire and a black wire. Connect the red wire to the terminal on the back of the keypad that is labeled "R". Connect the black wire to the terminal that is labeled "G".
Power on the keypad. The keypad will power on automatically when you connect the wires. The keypad will beep and the LED will flash.
Enter the programming mode. To enter the programming mode, press and hold the "Prog" button for 5 seconds. The LED will flash rapidly.
Enter the PIN code. The default PIN code is "1234". Enter the PIN code using the keypad. The LED will stop flashing.
Press the "Enter" button. The keypad will beep and the LED will flash slowly.
Test the keypad. Enter the PIN code into the keypad and press the "Enter" button. The garage door should open. If the garage door does not open, repeat steps 4-6.

Your LiftMaster keypad is now programmed and ready to use. You can change the PIN code at any time by following the steps above.

Troubleshooting

If you are having trouble programming your LiftMaster keypad, try the following:

Make sure that the wires are connected correctly.
Make sure that the keypad is powered on.
Make sure that you are entering the correct PIN code.
Try resetting the keypad by pressing and holding the "Reset" button for 10 seconds.

If you are still having trouble, contact LiftMaster customer support.