How To Program Garage Door Remote Genie

Genie garage door openers are a popular choice for homeowners because they are reliable and easy to use. If you need to program a new remote for your Genie garage door opener, follow these simple steps.

Step 1: Gather Your Materials

You will need the following materials to program a new Genie garage door remote:

A new Genie garage door remote
A ladder
A screwdriver

Step 2: Locate the Learn Button

The Learn button is located on the back of the garage door opener motor unit. It is usually a small, round button that is red or yellow.

Step 3: Open the Battery Compartment

Open the battery compartment on the new remote. You should see a small button inside the compartment.

Step 4: Press and Hold the Learn Button

Press and hold the Learn button on the garage door opener motor unit for about 5 seconds. The LED light on the motor unit will start to flash.

Step 5: Press the Button on the Remote

Press and hold the button on the new remote for about 2 seconds. The LED light on the motor unit will stop flashing and stay on.

Step 6: Release the Buttons

Release both the Learn button and the button on the remote.

Step 7: Test the Remote

Press the button on the new remote to test it. The garage door should open and close.

Tips

If you have more than one Genie garage door opener, you will need to program each remote separately.
You can also use the Learn button to program other devices, such as keypads and wall-mounted remotes.
If you are having trouble programming your remote, refer to the user manual for your specific Genie garage door opener model.