How To Program Garage Door Opener Keypad Liftmaster

How to Program Garage Door Opener Keypad Liftmaster

Programming a Liftmaster garage door opener keypad is a simple process that can be completed in a few minutes. By following these step-by-step instructions, you can easily set up your keypad and enjoy the convenience of keyless entry.

Step 1: Gather Necessary Materials

Before you begin, gather the following materials:

Liftmaster garage door opener keypad
Programming instructions for your specific keypad model
Screwdriver
Ladder (if necessary)

Step 2: Access the Learn Button

Locate the "Learn" button on your garage door opener. This button is typically located on the back or side of the unit. You may need to use a ladder to reach the button if your opener is mounted high on the ceiling.

Step 3: Enter Programming Mode

Press and hold the "Learn" button for 3 seconds. The LED indicator on the opener will begin to flash.

Step 4: Enter Keypad Code

Within 30 seconds of entering programming mode, enter your desired 4-digit keypad code. Press the "#" key to confirm your code.

Step 5: Exit Programming Mode

Press the "Learn" button again to exit programming mode. The LED indicator will turn off.

Step 6: Test the Keypad

Test your keypad by entering the code you programmed. The garage door should open or close accordingly.

Step 7: Mount the Keypad (Optional)

If you want to mount the keypad permanently, choose a location near the garage door that is out of the reach of children and is protected from the elements. Use the provided screws to secure the keypad to the wall.

Additional Tips

Choose a keypad code that is easy to remember but difficult for others to guess.
Test your keypad regularly to ensure it is functioning properly.
If you have any difficulties programming your keypad, consult the user manual or contact Liftmaster customer support.