How To Program A Genie Garage Door Remote

## How To Program A Genie Garage Door Remote

Genie garage door openers are a popular choice for homeowners because they are reliable and easy to use. One of the most important things you need to know about your Genie garage door opener is how to program the remote. This guide will walk you through the steps on how to program a Genie garage door remote.

Before You Start

Before you start programming your Genie garage door remote, you will need the following:

A Genie garage door opener

A Genie garage door remote

A ladder

A Phillips head screwdriver

Step 1: Locate the Learn Button

The first step is to locate the Learn button on your Genie garage door opener. The Learn button is usually located on the back or side of the opener. It is a small, black button with an LED light next to it.

Step 2: Press and Hold the Learn Button

Once you have located the Learn button, press and hold it for 5 seconds. The LED light next to the button will start to flash.

Step 3: Release the Learn Button

After 5 seconds, release the Learn button. The LED light will continue to flash.

Step 4: Press the Remote Button

Within 30 seconds of releasing the Learn button, press the button on the remote that you want to program. The LED light on the garage door opener will stop flashing and turn solid.

Step 5: Repeat for Additional Remotes

If you want to program additional remotes, repeat steps 2-4 for each remote.

Step 6: Test the Remote

Once you have programmed all of the remotes, test them to make sure they are working properly. Press the button on the remote and the garage door should open or close.

Troubleshooting

If you are having trouble programming your Genie garage door remote, there are a few things you can try:

Make sure that the batteries in the remote are fresh.

Make sure that the antenna on the remote is extended.

Try programming the remote from a closer distance to the garage door opener.

If you are still having trouble, you can contact Genie customer support for help.