How To Program A Garage Door Remote Liftmaster

How to Program a Garage Door Remote LiftMaster

Programming a LiftMaster garage door remote is a simple process that can be completed in a few minutes. By following these instructions, you can easily program your remote to open and close your garage door.

Step 1: Gather Your Materials

You will need the following materials to program your LiftMaster garage door remote:

Garage door remote
Ladder
Screwdriver

Step 2: Locate the Learn Button

The Learn button is located on the back of the garage door opener motor unit. It is usually a small, red button.

Step 3: Press the Learn Button

Press and hold the Learn button for 2 seconds. The LED light on the opener will start to flash.

Step 4: Press the Remote Button

Within 30 seconds, press the button on the remote that you want to program. The LED light on the opener will stop flashing and stay on solid.

Step 5: Test the Remote

Press the button on the remote to open and close the garage door. If the door opens and closes properly, the remote is programmed.

Step 6: Repeat for Additional Remotes

If you have additional remotes that you want to program, repeat steps 2-5 for each remote.

Troubleshooting

If you are having trouble programming your LiftMaster garage door remote, try the following troubleshooting tips:

Make sure that the batteries in the remote are fresh.
Make sure that the Learn button is pressed and held for 2 seconds before pressing the remote button.
Make sure that the remote is pointed directly at the garage door opener motor unit when you press the button.
If you are still having trouble, contact LiftMaster customer support.