How To Program A Chamberlain Garage Remote

Chamberlain garage door openers are a convenient way to open and close your garage door without having to get out of your car. They are easy to program, and you can do it yourself in just a few minutes.

Here are the steps on how to program a Chamberlain garage remote:

Press and hold the "learn" button on the garage door opener unit for 3 seconds, or until the LED light starts to flash rapidly.
Within 30 seconds, press and hold the button on the remote control that you want to program.
Hold the button on the remote control until the LED light on the garage door opener unit stops flashing and stays on solid.
Repeat steps 2 and 3 for each additional remote control that you want to program.

Once you have programmed the remote controls, test them to make sure they work properly. If they do not work, repeat the programming steps.

Tips for programming a Chamberlain garage remote:

Make sure that the batteries in the remote control are fresh.
If you are programming multiple remote controls, make sure that you do them one at a time.
If you have any problems programming the remote control, consult the user manual for your garage door opener.

Troubleshooting tips for programming a Chamberlain garage remote:

If the LED light on the garage door opener unit does not flash when you press the "learn" button, check to make sure that the batteries in the remote control are fresh.
If the LED light on the garage door opener unit flashes rapidly when you press the button on the remote control, make sure that you are holding the button down for long enough.
If the LED light on the garage door opener unit does not stay on solid after you press the button on the remote control, the remote control may not be programmed correctly. Repeat the programming steps.

If you have followed these steps and are still having problems programming your Chamberlain garage remote, you can contact Chamberlain customer support for assistance.