How To Open Electric Garage Door Manually

Electric garage doors are convenient and secure, but what happens when the power goes out or the motor fails? Knowing how to open your garage door manually is an important safety measure. Here are the steps on how to do it:

1. Locate the Manual Release Cord

Most electric garage doors have a manual release cord that allows you to disengage the motor and open the door by hand. The cord is usually located near the center of the door, hanging from the ceiling. Pull the cord down to release the door.

2. Pull the Door Up

Once the manual release cord is pulled, the door will be disconnected from the motor. You can now lift the door manually by pulling it up. The door may be heavy, so it is recommended to have someone assist you.

3. Engage the Lock (If Necessary)

Some electric garage doors have a lock that engages when the door is closed. If your door has a lock, you will need to disengage it before you can open the door manually. To do this, insert the key into the lock and turn it to the unlock position.

4. Open the Door

Once the lock is disengaged, you can open the door manually by pulling it up. The door may be heavy, so it is recommended to have someone assist you.

Additional Tips

Here are some additional tips for opening an electric garage door manually:

If you have a sectional garage door, you may need to disengage the sections of the door before you can open it manually. To do this, pull the release cord for each section of the door.

If you have a roll-up garage door, you may need to use a crank to open the door manually. The crank is usually located on the side of the door.

If you are unable to open the garage door manually, do not attempt to force it. Call a qualified technician for assistance.

It is important to test the manual release cord regularly to ensure that it is working properly. To do this, pull the cord down and try to open the door manually.

If you have any questions about how to open your electric garage door manually, consult your owner's manual or contact a qualified technician.