How To Lube Garage Door Springs

Garage door springs are an essential part of your garage door system. They help to lift and lower the door, and they can also prevent the door from falling if it becomes unbalanced. However, over time, springs can become dry and rusty, which can make them less effective and more likely to break. To prevent this, it's important to lubricate your garage door springs on a regular basis.

The frequency with which you need to lubricate your springs will depend on how often you use your garage door and the climate in which you live. In general, it's a good idea to lubricate your springs at least once a year, or more often if you live in a humid or dusty climate.

To lubricate your garage door springs, you will need the following supplies:

A step ladder
A can of lithium grease
A rag

Once you have your supplies, follow these steps to lubricate your springs:

Safety First:

Before you begin, turn off the power to the garage door opener. Then, open up the garage door and place a safety brace under the door to prevent it from falling if the springs break. 2.

Locate your springs:

Garage door springs are usually located above the door, on either side of the tracks. They are usually made of metal, and they will be under tension. 3.

Apply the lubricant:

Use the rag to apply a thin layer of lithium grease to the springs. Be sure to coat the entire surface of the springs, including the coils. 4.

Check the springs:

Once you have applied the grease, open and close the garage door a few times to make sure that the springs are working properly. If the springs are still making noise or if the door is not opening or closing smoothly, you may need to apply more grease or replace the springs.

By following these steps, you can keep your garage door springs lubricated and in good working condition. This will help to prevent the springs from breaking and causing damage to your garage door or your property.

Additional tips for lubricating garage door springs

Use a high-quality lithium grease. This type of grease is specifically designed to lubricate metal surfaces and it will not break down over time.
Apply the grease evenly to the springs. Avoid getting too much grease on the springs, as this can attract dirt and debris.
If you are not comfortable lubricating your garage door springs yourself, you can hire a professional garage door repair technician to do it for you.