How To Level A Garage Floor

If your garage floor is uneven, it can be a tripping hazard and make it difficult to park your car or store your belongings. Leveling a garage floor is not a difficult project, but it does require some time and effort. Here are the steps on how to level a garage floor:

1. Prepare the floor

The first step is to prepare the floor by removing any dirt, debris, or grease. You can do this by sweeping or vacuuming the floor and then washing it with a degreaser. Once the floor is clean, let it dry completely.

2. Measure the floor

Next, you need to measure the floor to determine how much leveling compound you will need. To do this, measure the length and width of the floor and then multiply the two numbers together. This will give you the square footage of the floor.

3. Purchase leveling compound

Once you know the square footage of the floor, you can purchase the leveling compound. Leveling compound is a self-leveling material that is used to level uneven floors. It is important to choose a leveling compound that is specifically designed for garage floors.

4. Mix the leveling compound

According to the manufacturer's instructions, mix the leveling compound with water. Once the compound is mixed, it will be a thick, pourable consistency.

5. Pour the leveling compound

Starting at one corner of the floor, pour the leveling compound onto the floor. Use a trowel to spread the compound evenly over the floor. Work in small sections, about 3 feet by 3 feet, and feather the edges of each section as you go.

6. Level the compound

Once the compound is poured, use a level to check the floor for level. If the floor is not level, use a trowel to adjust the compound until it is.

7. Let the compound dry

Once the compound is level, let it dry completely. The drying time will vary depending on the type of leveling compound you used. Once the compound is dry, you can use your garage floor as usual.