How To Install Genie Garage Door Opener

Installing a Genie garage door opener is a relatively simple task that can be completed in a few hours. However, it is important to follow the instructions carefully to ensure that the opener is installed correctly and safely.

Materials Needed

Before you begin, you will need to gather the following materials:

Genie garage door opener
Mounting hardware
Screwdriver
Drill
Socket wrench
Level
Extension cord (optional)

Safety Precautions

Before you begin installing the garage door opener, it is important to take the following safety precautions:

Disconnect the power to the garage door.
Make sure that the garage door is closed.
Wear gloves and safety glasses.

Step-by-Step Instructions

Once you have gathered the necessary materials and taken the proper safety precautions, you can begin installing the Genie garage door opener. Follow these steps:

Mount the motor head. The motor head is the main part of the garage door opener and it is responsible for lifting and lowering the door. To mount the motor head, first identify the location where it will be installed. The motor head should be mounted on the ceiling, directly above the center of the garage door. Once you have identified the location, use the included mounting hardware to secure the motor head to the ceiling.
Install the drive belt. The drive belt is responsible for transmitting power from the motor head to the trolley. To install the drive belt, first attach one end of the belt to the motor head. Then, route the belt around the pulley on the trolley and attach the other end of the belt to the pulley on the motor head. Make sure that the belt is tight enough so that it will not slip, but not so tight that it will damage the belt or the pulleys.
Install the trolley. The trolley is the part of the garage door opener that travels along the track and opens and closes the door. To install the trolley, first attach the trolley brackets to the track. Then, lift the trolley onto the brackets and secure it in place with the included bolts.
Install the track. The track is the metal beam that the trolley travels along. To install the track, first cut the track to the desired length. Then, attach the track to the ceiling using the included mounting hardware. Make sure that the track is level and that it is securely attached to the ceiling.
Install the door arm. The door arm is the part of the garage door opener that attaches to the door and opens and closes it. To install the door arm, first attach one end of the arm to the trolley. Then, lift the other end of the arm and attach it to the door. Make sure that the door arm is level and that it is securely attached to the door.
Connect the power. Once the garage door opener is installed, you can connect the power. To do this, first connect the power cord to the motor head. Then, plug the power cord into an outlet.
Program the remote control. The remote control is used to open and close the garage door from a distance. To program the remote control, first press and hold the button on the remote control until the LED light starts flashing. Then, press and hold the button on the motor head until the LED light on the remote control stops flashing. The remote control is now programmed.

Troubleshooting

If you are having problems installing your Genie garage door opener, there are a few things you can check:

Make sure that the power is connected to the garage door opener.
Make sure that the remote control is programmed.
Check the drive belt to make sure that it is tight enough.
Check the track to make sure that it is level and that it is securely attached to the ceiling.
Check the door arm to make sure that it is level and that it is securely attached to the door.

If you are still having problems, you can contact Genie customer support for assistance.