How To Fix A Spring On Garage Door

Garage doors are an important part of any home, and they need to be in good working order to keep your home safe and secure. One of the most important parts of a garage door is the spring, which helps to open and close the door. If the spring breaks, the door will not be able to open or close properly, and it could become a safety hazard.

There are two main types of springs used in garage doors: torsion springs and extension springs. Torsion springs are mounted on a shaft above the door, and they use a coil to store energy. When the door is opened, the spring unwinds and helps to lift the door. When the door is closed, the spring winds up and stores energy for the next time the door is opened.

Extension springs are mounted on either side of the door, and they use a pulley system to store energy. When the door is opened, the springs stretch and help to lift the door. When the door is closed, the springs contract and store energy for the next time the door is opened.

If the spring on your garage door breaks, you will need to replace it. You can do this yourself if you have some basic tools and knowledge, or you can hire a professional to do it for you. Here are the steps on how to fix a spring on a garage door:

### 1. Safety first!

Before you start working on your garage door, make sure to disconnect the power. You should also wear safety glasses and gloves.

### 2. Identify the type of spring

The first step is to identify the type of spring that you have. Torsion springs are mounted on a shaft above the door, and they use a coil to store energy. Extension springs are mounted on either side of the door, and they use a pulley system to store energy.

### 3. Remove the old spring

Once you have identified the type of spring, you can remove the old spring. To remove a torsion spring, you will need to use a wrench to loosen the bolts that hold the spring in place. Once the bolts are loose, you can carefully remove the spring.

To remove an extension spring, you will need to use a pair of pliers to disconnect the springs from the pulley system. Once the springs are disconnected, you can carefully remove them.

### 4. Install the new spring

Once you have removed the old spring, you can install the new spring. To install a torsion spring, you will need to use a wrench to tighten the bolts that hold the spring in place. Make sure to tighten the bolts evenly, so that the spring is properly tensioned.

To install an extension spring, you will need to use a pair of pliers to connect the springs to the pulley system. Make sure to connect the springs correctly, so that they are properly tensioned.

### 5. Test the door

Once you have installed the new spring, you need to test the door to make sure that it is working properly. Open and close the door a few times to make sure that it moves smoothly and that there is no binding or squeaking.

### 6. Lubricate the door

Once you have tested the door, you should lubricate the door to help keep it working smoothly. You can use a silicone-based lubricant to lubricate the hinges, rollers, and tracks.