How To Clean Garage Floor For Epoxy

Before applying epoxy to your garage floor, it is important to clean the floor thoroughly to remove any dirt, oil, or grease. This will help the epoxy to adhere properly and create a durable finish. Here are the steps on how to clean a garage floor for epoxy:

1. Sweep or vacuum the floor. This will remove any loose dirt or debris.

2. Scrub the floor with a degreaser. A degreaser will help to remove any oil or grease from the floor. You can use a commercial degreaser or a homemade degreaser made with equal parts water and white vinegar.

3. Rinse the floor thoroughly with water. This will remove any remaining degreaser or dirt.

4. Etch the floor. Etching the floor will help to create a rough surface that the epoxy can adhere to. You can etch the floor with a commercial etching solution or a homemade etching solution made with equal parts water and muriatic acid.

5. Rinse the floor thoroughly with water. This will remove any remaining etching solution.

6. Allow the floor to dry completely. This may take several hours or overnight.

Once the floor is clean and dry, you can apply the epoxy according to the manufacturer's instructions.

Here are some additional tips for cleaning a garage floor for epoxy:

If the floor is very dirty, you may need to scrub it several times with a degreaser.
If the floor is heavily etched, you may need to rinse it with a neutralizing solution before applying the epoxy.
Allow the floor to dry completely before applying the epoxy. This will help to ensure that the epoxy adheres properly.
Follow the manufacturer's instructions for applying the epoxy.