How To Change Garage Spring

Garage door springs are an important part of your garage door system. They help to lift and lower the door, and they can wear out over time. If your garage door springs are broken or damaged, it can be dangerous to use your garage door. That's why it's important to знать, как заменить пружины гаражных ворот, if they need to be replaced.

There are two main types of garage door springs: extension springs and torsion springs. Extension springs are mounted on the sides of the garage door, and they stretch when the door is opened. Torsion springs are mounted on a shaft above the garage door, and they twist when the door is opened.

To determine what type of springs your garage door has, look at the sides of the door. If you see two springs that are mounted on the sides of the door, you have extension springs. If you see a single spring that is mounted on a shaft above the door, you have torsion springs.

Once you know what type of springs your garage door has, you can follow the steps below to replace them.

Replacing Extension Springs

Gather your materials. You will need two new extension springs, a pair of pliers, a screwdriver, and a ladder.
Disconnect the power to your garage door opener. This will prevent the door from opening or closing while you are working on it.
Open the garage door. This will give you access to the springs.
Locate the springs. They will be mounted on the sides of the garage door, near the top.
Use the pliers to remove the springs from the door. Be careful not to let the springs snap back at you.
Install the new springs. Make sure that the springs are properly attached to the door and that they are under tension.
Reconnect the power to your garage door opener.
Test the garage door to make sure that it opens and closes properly.

Replacing Torsion Springs

Gather your materials. You will need two new torsion springs, a pair of pliers, a screwdriver, a ladder, and a winding bar.
Disconnect the power to your garage door opener.
Open the garage door. This will give you access to the springs.
Locate the springs. They will be mounted on a shaft above the garage door.
Use the pliers to remove the springs from the shaft. Be careful not to let the springs snap back at you.
Install the new springs. Make sure that the springs are properly attached to the shaft and that they are under tension.
Reconnect the power to your garage door opener.
Test the garage door to make sure that it opens and closes properly.

Replacing garage door springs can be a dangerous task. If you are not comfortable doing it yourself, it is best to hire a professional.