How To Change Garage Door Spring

How to Change Garage Door Spring

Garage door springs are an essential part of your garage door system. They help to lift and lower the door, and they can wear out over time. If you notice that your garage door is becoming difficult to open or close, it may be time to replace the springs.

There are two main types of garage door springs: torsion springs and extension springs. Torsion springs are mounted above the door and are wound around a shaft. Extension springs are mounted on either side of the door and are stretched when the door is opened. Both types of springs can be dangerous to work with, so it is important to follow all safety precautions when replacing them.

Before You Start

Before you start working on your garage door springs, it is important to take some safety precautions. First, make sure that the garage door is closed and that the power is turned off. Second, wear gloves and safety glasses to protect yourself from injury.

You will also need some tools to replace your garage door springs. These tools include:

Wrench

Screwdriver

Pliers

Ladder Replacing Torsion Springs

To replace torsion springs, follow these steps:

Locate the torsion springs. They will be mounted above the door on a shaft.

Using a wrench, loosen the nuts that hold the springs in place.

Carefully remove the springs from the shaft.

Install the new springs on the shaft.

Tighten the nuts to secure the springs in place.

Replacing Extension Springs