How To Change Garage Door Seal

How to Change Garage Door Seal

Garage door seals are an important part of keeping your garage warm and dry. They also help to keep out pests and rodents. Over time, seals can become damaged or worn, and they will need to be replaced. Replacing a garage door seal is a relatively easy project that can be completed in a few hours.

To replace a garage door seal, you will need the following tools and materials:

New garage door seal
Utility knife
Phillips head screwdriver
Hammer
Nail set

Once you have gathered your tools and materials, you can begin the replacement process.

1. Remove the old seal. To remove the old seal, start by cutting it away from the door with a utility knife. Be careful not to damage the door.

2. Clean the door. Once the old seal has been removed, clean the door with a damp cloth to remove any dirt or debris.

3. Apply the new seal. Start by applying a bead of adhesive to the back of the new seal. Then, press the seal into place on the door. Make sure that the seal is aligned properly and that it is making good contact with the door.

4. Secure the seal. Once the seal has been applied, secure it in place with nails or screws. Use a nail set to countersink the nails or screws so that they are flush with the surface of the door.

5. Test the seal. Once the seal has been installed, test it by closing the garage door. The seal should make good contact with the floor and the sides of the door. If there are any gaps, the seal will need to be adjusted.

Replacing a garage door seal is a relatively easy project that can be completed in a few hours. By following these steps, you can keep your garage warm and dry and help to keep out pests and rodents.