How To Change Garage Door Rollers

Garage door rollers are an essential part of the garage door system. They allow the door to roll up and down smoothly and quietly. Over time, however, rollers can wear out and need to be replaced. If you're having problems with your garage door, it's worth checking the rollers to see if they need to be replaced.

Here's a step-by-step guide on how to change garage door rollers:

1. Gather your tools and materials

You will need the following tools and materials to change garage door rollers:

New garage door rollers
Wrench
Screwdriver
Hammer
Safety glasses

2. Prepare the garage door

Before you start working on the garage door, it's important to prepare it so that it's safe to work on.

Disconnect the garage door opener.
Lower the garage door to the ground and lock it in place.
Put on your safety glasses.

3. Remove the old rollers

Once the garage door is prepared, you can start removing the old rollers.

Locate the rollers at the top of the garage door. They will be attached to the door with bolts or screws.
Use the wrench or screwdriver to remove the bolts or screws that are holding the rollers in place.
Once the bolts or screws are removed, you should be able to pull the rollers off of the door.

4. Install the new rollers

Once the old rollers are removed, you can install the new rollers.

Place the new rollers onto the door. Make sure that the rollers are facing the correct direction.
Use the bolts or screws to secure the rollers to the door.
Tighten the bolts or screws until the rollers are securely in place.

5. Test the garage door

Once the new rollers are installed, you should test the garage door to make sure that it's working properly.

Reconnect the garage door opener.
Raise the garage door and lower it several times to make sure that it's moving smoothly and quietly.

6. Lubricate the rollers

Once you've tested the garage door, you should lubricate the rollers to help keep them running smoothly.

Apply a few drops of oil to each roller.
Work the oil into the roller by rolling it back and forth.

Conclusion

Changing garage door rollers is a relatively simple task that can be completed in a few hours. By following these steps, you can save yourself the cost of hiring a professional.