How To Change Garage Code

Your garage door opener is a convenient way to get in and out of your garage without having to get out of your car. But what happens if you lose your remote or if the code gets changed? Don't worry, changing the code on your garage door opener is a relatively simple process. Here's how to do it:

1. Locate the learn button on your garage door opener.

The learn button is usually located on the back or side of the opener. It will be a small, round button that is usually red or green.

2. Press and hold the learn button for 5 seconds.

The LED light on the opener will start to flash. This indicates that the opener is in learn mode.

3. Press the button on your new remote.

The LED light on the opener will stop flashing and the remote will be programmed.

4. Repeat steps 2 and 3 for any additional remotes.

You can program up to 4 remotes to your garage door opener.

5. Test the new remote.

Press the button on the remote to make sure that it opens and closes the garage door.

Tips

If you are having trouble programming your remote, try using a different remote.
If you have lost your remote, you can purchase a new one from the manufacturer of your garage door opener.
You can also use a smartphone app to control your garage door opener. This is a great option if you want to be able to open and close your garage door from anywhere.

Troubleshooting

If the LED light on the opener does not flash when you press the learn button, the opener may be in lock mode. To unlock the opener, press and hold the learn button for 10 seconds.
If the remote does not work after you have programmed it, the battery may be low. Replace the battery and try again.
If you are still having trouble, you can contact the manufacturer of your garage door opener for assistance.