How To Adjust Springs On Garage Door
Garage door springs are an important part of the door's operation. They help to lift the door and keep it in place when it is closed. Over time, springs can wear out or become misaligned, which can cause the door to become difficult to open or close. If you are having problems with your garage door, it is important to inspect the springs and adjust them if necessary.
There are two types of garage door springs: torsion springs and extension springs. Torsion springs are mounted above the door opening and are twisted when the door is opened. Extension springs are mounted on either side of the door opening and are stretched when the door is opened. Both types of springs can be adjusted, but the process is different for each type.
Adjusting Torsion Springs
To adjust torsion springs, you will need a winding bar and a pair of pliers. The winding bar is used to turn the spring, and the pliers are used to hold the spring in place. Follow these steps to adjust torsion springs:
- Locate the springs. Torsion springs are typically located above the door opening, mounted on a metal shaft.
- Disconnect the door from the springs. To do this, pull the release cord or chain that is attached to the door. This will allow the door to fall to the ground.
- Insert the winding bar into the spring. The winding bar should be inserted into the hole in the center of the spring.
- Turn the spring. Turn the spring clockwise to tighten it or counterclockwise to loosen it. The amount of adjustment needed will depend on the weight of the door and the condition of the springs.
- Reconnect the door to the springs. Once the springs have been adjusted, reconnect the door to the springs by pulling the release cord or chain.
Adjusting Extension Springs
To adjust extension springs, you will need a pair of pliers and a C-clamp. The pliers are used to hold the spring in place, and the C-clamp is used to compress the spring. Follow these steps to adjust extension springs:
- Locate the springs. Extension springs are typically located on either side of the door opening, mounted on metal hooks.
- Disconnect the door from the springs. To do this, pull the release cord or chain that is attached to the door. This will allow the door to fall to the ground.
- Compress the spring. Use the C-clamp to compress the spring. The amount of compression needed will depend on the weight of the door and the condition of the springs.
- Hold the spring in place. Use the pliers to hold the spring in place while you remove the C-clamp.
- Reconnect the door to the springs. Once the springs have been adjusted, reconnect the door to the springs by pulling the release cord or chain.
Safety Precautions
Garage door springs are under a lot of tension, so it is important to take safety precautions when adjusting them. Always wear safety glasses and gloves. Do not attempt to adjust the springs if you are not comfortable doing so. If you have any doubts, it is best to call a professional.
How To Balance A Garage Door Torsion Spring Adjustment Easy Clear Instructions
How To Adjust A Garage Door Spring With S Wikihow
How To Put Tension Back On Your Garage Door Spring
How To Know If Your Garage Door Springs Need Adjustments The Woodlands Tx
How To Adjust A Garage Door Spring With S Wikihow
How To Adjust A Garage Door Spring Rcs Doors
Adjust Garage Door Springs In Easy Safe Steps Aaa Doors Inc
How To Adjust A Garage Door Spring With S Wikihow
Garage Door Coil Spring Tension Adjustment Adventure Rider
How To Adjust A Garage Door Spring With S Wikihow