How Do You Wind A Garage Door Spring

Garage door torsion springs are used to counterbalance the weight of the garage door and make it easier to lift. Over time, these springs can lose tension and need to be re-wound. Winding a garage door spring can be dangerous if not done properly, so it's important to follow the steps carefully.

Before you start, gather the following tools:

A ladder
A pair of pliers
A winding bar
Safety glasses
Gloves

Once you have your tools, follow these steps:

Put on your safety glasses and gloves.
Climb the ladder and locate the torsion springs. They will be located above the door, on either side of the doorframe.
Use the pliers to remove the cotter pin that holds the spring in place.
Attach the winding bar to the spring and insert it into the slot in the winding cone.
Slowly wind the spring, turning the winding bar clockwise. Be careful not to over-wind the spring, as this can cause it to break.
Once the spring is wound, insert the cotter pin back into the hole to hold it in place.
Repeat steps 3-6 for the other spring.
Once both springs are wound, close the garage door and test it to make sure it opens and closes smoothly.

If you're not comfortable winding a garage door spring yourself, you can hire a professional to do it for you. It's important to have the springs checked and adjusted regularly to ensure that your garage door is operating safely and efficiently.

Here are some additional tips for winding a garage door spring:

Make sure that the garage door is closed before you start winding the springs.
Never wind the springs more than one turn at a time.
If the spring starts to bind, stop winding and call a professional.
Never attempt to wind a broken spring.

Winding a garage door spring can be a dangerous task, so it's important to follow these steps carefully. If you're not comfortable doing it yourself, you can hire a professional to do it for you.