Genie Garage Door Opener Remote Control

Genie is a leading manufacturer of garage door openers and accessories. The company offers a wide range of remote controls for its openers, including the Genie Intellicode remote. The Intellicode remote is a rolling code remote, which means that it uses a different code each time it is used. This makes it more difficult for thieves to copy the code and gain access to your garage.

The Genie Intellicode remote is available in a variety of models, including the following:

Genie Intellicode Remote Control (Model 3780)
Genie Intellicode Remote Control with Keypad (Model 3790)
Genie Intellicode Remote Control with Wall Mount (Model 3795)

The Genie Intellicode Remote Control (Model 3780) is a basic remote control that offers three buttons: open, close, and light. The Genie Intellicode Remote Control with Keypad (Model 3790) offers the same three buttons, plus a keypad that can be used to enter a PIN code to open the garage door. The Genie Intellicode Remote Control with Wall Mount (Model 3795) offers the same features as the Model 3790, plus a wall mount that can be used to mount the remote control on the wall.

The Genie Intellicode remote is a durable and reliable remote control that is easy to use. It is a good choice for anyone who is looking for a secure and convenient way to open and close their garage door.

How to Program a Genie Intellicode Remote

Programming a Genie Intellicode remote is a simple process that can be completed in a few minutes. To program the remote, follow these steps:

1. Press and hold the "Program" button on the back of the garage door opener for three seconds. 2. Release the "Program" button and press the button on the remote control that you want to program. 3. Hold the button on the remote control until the LED on the back of the garage door opener flashes. 4. Release the button on the remote control and press it again. 5. The LED on the back of the garage door opener will flash again. 6. Repeat steps 4 and 5 until the LED on the back of the garage door opener stops flashing. 7. The remote control is now programmed.

Troubleshooting Genie Intellicode Remote Problems

If you are having problems with your Genie Intellicode remote, there are a few things that you can do to troubleshoot the problem:

Check the batteries in the remote control. If the batteries are low, the remote control will not work properly.
Make sure that the remote control is within range of the garage door opener. The remote control will not work if it is too far away from the opener.
Check the antenna on the garage door opener. If the antenna is damaged, the remote control will not be able to communicate with the opener.
Reset the garage door opener. Resetting the opener will clear all of the programmed remotes from the opener's memory. You will then need to reprogram the remotes.

If you have followed these troubleshooting steps and you are still having problems with your Genie Intellicode remote, you should contact Genie customer service.