Garage Door Spring Replacement Parts

Garage door springs are an essential part of your garage door system. They help to lift and lower the door smoothly and safely. Over time, however, springs can wear out or break, which can make it difficult or impossible to open or close your garage door. If you are experiencing problems with your garage door springs, it is important to replace them as soon as possible.

There are two main types of garage door springs: extension springs and torsion springs. Extension springs are located on either side of the door and run parallel to the track. Torsion springs are located above the door and run perpendicular to the track. Both types of springs are made of high-quality steel and are designed to last for many years. However, even the best springs will eventually need to be replaced.

If you are not comfortable replacing garage door springs yourself, it is best to call a qualified technician. Replacing springs can be dangerous if you do not have the proper tools and experience. However, if you are confident in your abilities, you can replace the springs yourself by following these steps:

Gather your materials. You will need a new set of springs, a socket wrench, a screwdriver, and a pair of pliers.
Disconnect the power to the garage door opener. This will prevent the door from opening or closing while you are working on it.
Raise the garage door manually. To do this, pull the release cord located near the door. Once the door is fully open, secure it in place with a broom or other object.
Locate the springs. Extension springs are located on either side of the door, while torsion springs are located above the door.
Remove the old springs. To remove extension springs, simply unhook them from the brackets on either side of the door. To remove torsion springs, you will need to use a socket wrench to loosen the bolts that hold them in place.
Install the new springs. To install extension springs, simply hook them onto the brackets on either side of the door. To install torsion springs, you will need to use a socket wrench to tighten the bolts that hold them in place.
Reconnect the power to the garage door opener. Once the new springs are installed, you can reconnect the power to the garage door opener. Test the door to make sure that it is working properly.

Replacing garage door springs can be a challenging task, but it is one that can be completed by most do-it-yourselfers. By following these steps, you can safely and easily replace the springs on your garage door.

Here are some additional tips for replacing garage door springs:

Be sure to choose the correct size and type of springs for your garage door. Springs that are too weak or too strong can cause the door to malfunction.
When removing old springs, be careful not to damage the door or the track.
When installing new springs, be sure to tighten the bolts securely. Loose bolts can cause the springs to come loose and fail.
Test the door carefully after replacing the springs. Make sure that the door opens and closes smoothly and safely.