Cost Of Garage Door Spring Replacement

Replacing a garage door spring is a common repair that can be completed by a homeowner with some basic tools and knowledge. The cost of the springs will vary depending on the type of spring, the size of the garage door, and the location. However, the average cost of a garage door spring replacement is between $100 and $300.

Types of Garage Door Springs

There are two main types of garage door springs: torsion springs and extension springs. Torsion springs are mounted above the door and are attached to a metal shaft that runs through the center of the door. Extension springs are mounted on either side of the door and are attached to a metal bar that runs across the top of the door.

Torsion springs are more common than extension springs, and they are generally more expensive. However, torsion springs are also more durable and last longer than extension springs.

Size of the Garage Door

The size of the garage door will also affect the cost of the springs. Larger doors require more powerful springs, which are more expensive. The average cost of a spring for a single-car garage door is between $50 and $150. The average cost of a spring for a double-car garage door is between $100 and $200.

Location

The location of the garage door will also affect the cost of the springs. Springs that are installed in a garage that is located in a cold climate will be more expensive than springs that are installed in a garage that is located in a warm climate. This is because the springs in a cold climate must be able to withstand the weight of snow and ice.

If you are considering replacing the springs on your garage door, it is important to get an estimate from a qualified technician. The technician will be able to assess the type of springs that are needed for your door and the cost of the replacement.

DIY Garage Door Spring Replacement

Safety First:

Before attempting any repairs, ensure your safety by following these precautions:

Disconnect the garage door opener.
Secure the door in place with C-clamps or a locking tool.
Wear gloves and safety glasses.

Materials and Tools:

Gather the necessary materials and tools before starting the task:

New torsion or extension springs (determined by your garage door type)
Winding bars or a spring tension tool
Adjustable wrench or socket wrench
Screwdriver or drill
Measuring tape
Lubricant (optional)
Step ladder or work platform

Step-by-Step Instructions: 1. Measure and Select Springs:

Measure the old springs using a measuring tape or consult your garage door manual to determine the correct size and type of replacement springs.

2. Remove Old Springs:

Use winding bars or a spring tension tool to carefully unwind the old springs following the manufacturer's guidelines. Note the direction of the winding for later reference.

3. Install New Springs:

Wind the new springs in the same direction as the old ones using winding bars or a spring tension tool. Ensure they are properly aligned and seated in their brackets or drums.

4. Adjust Tension:

Adjust the tension of the springs using an adjustable wrench or socket wrench. Refer to the manufacturer's instructions or use a torque wrench for precise adjustments.

5. Secure Springs:

Use bolts, nuts, or screws to secure the springs in place according to the manufacturer's instructions.

6. Lubricate (Optional):

Apply lubricant to moving parts, such as hinges and rollers, to ensure smooth operation and extend their lifespan.

7. Reconnect and Test:

Reconnect the garage door opener and test the door's operation. Ensure it opens and closes smoothly without any unusual noises or vibrations.