Chi Garage Door Replacement Panels

By | July 11, 2024

Chi Garage Door Replacement Panels

Replacing panels on a CHI garage door is a relatively straightforward project that can be completed in a few hours. By following these step-by-step instructions, you can easily replace damaged or outdated panels and restore your garage door to its former glory.

Materials You'll Need:

  1. Replacement CHI garage door panel
  2. Drill
  3. Screwdriver
  4. Wrench
  5. Measuring tape
  6. Level
  7. Safety glasses

Step-by-Step Instructions:

  1. Safety First: Before beginning, put on your safety glasses to protect your eyes from debris.
  2. Measure and Mark: Use a measuring tape to determine the location of the damaged panel. Mark the edges of the panel on the garage door.
  3. Remove the Old Panel: Use a screwdriver to remove the screws that secure the damaged panel to the door. Lift the panel off the door.
  4. Install the New Panel: Position the new panel in the opening and align it with the marks you made earlier. Use screws to secure the panel to the door, starting with the top screws and working your way down.
  5. Adjust the Hinges: If the new panel causes the door to bind or not open smoothly, you may need to adjust the hinges. Use a wrench to loosen the bolts on the hinges and adjust the door until it operates properly.
  6. Check the Level: Use a level to ensure the new panel is installed straight and level. Make any necessary adjustments to the hinges or screws to correct any misalignment.
  7. Finishing Touches: Once the new panel is installed and adjusted properly, you can apply touch-up paint or caulk around the edges for a finished look.

Tips for Success: