Change Battery Craftsman Garage Door Opener

A Craftsman garage door opener is a convenient way to open and close your garage door without having to get out of your car. However, like all batteries, the battery in your Craftsman garage door opener will eventually need to be replaced. Here's a step-by-step guide on how to change the battery in your Craftsman garage door opener:

1. Safety First

Before you begin, make sure that the garage door is closed and the power to the opener is turned off. You can do this by unplugging the opener from the outlet or by flipping the circuit breaker that powers the opener.

2. Locate the Battery

The battery in your Craftsman garage door opener is typically located on the back of the motor unit. It will be a small, black plastic box with two terminals.

3. Disconnect the Battery

Use a screwdriver to loosen the terminals on the battery. Once the terminals are loose, you can pull the battery out of the motor unit.

4. Install the New Battery

Take the new battery and insert it into the motor unit. Make sure that the terminals on the battery are aligned with the terminals on the motor unit.

5. Tighten the Terminals

Use a screwdriver to tighten the terminals on the battery. Make sure that the terminals are tight enough so that the battery will not come loose.

6. Test the Opener

Once the new battery is installed, you can turn the power back on to the opener and test it. Press the button on the remote control to open and close the garage door.

7. Reprogram the Opener (If Necessary)

If the opener does not work after you have installed the new battery, you may need to reprogram the opener. The reprogramming process will vary depending on the model of your opener. Consult the user manual for your opener for instructions on how to reprogram it.

Replacing the battery in your Craftsman garage door opener is a simple and straightforward process. By following these steps, you can keep your garage door opener running smoothly for years to come.