Chamberlain Garage Door Opener How To Program

Chamberlain Garage Door Opener: How to Program

Programming your Chamberlain garage door opener is a relatively simple process that can be completed in a few minutes. By following these step-by-step instructions, you can easily set up your opener to work with your remote control or keypad.

Materials Required:

Chamberlain garage door opener
Remote control or keypad
Ladder (optional)

Step 1: Locate the Learn Button

The Learn button is typically located on the back of the garage door opener motor unit. It is usually a small, black button with the word "Learn" or "Smart" written on it.

Step 2: Press the Learn Button

Press and hold the Learn button for a few seconds until the LED light on the opener flashes. This indicates that the opener is in programming mode.

Step 3: Activate the Remote Control or Keypad

Within 30 seconds of pressing the Learn button, press the button on your remote control or keypad that you want to program. The LED light on the opener should flash rapidly, indicating that the device has been successfully programmed.

Step 4: Test the Opener

Once the device has been programmed, test the opener by pressing the corresponding button on the remote control or keypad. The door should open or close smoothly.

Additional Notes:

If you have multiple remote controls or keypads, you can program them all by following the same steps.
Some Chamberlain garage door openers have a rolling code feature, which means the code changes each time the door is opened or closed. This prevents unauthorized access to your garage.
If you have lost your remote control or keypad, you can purchase a replacement from Chamberlain or a local hardware store.
If you encounter any difficulties programming your Chamberlain garage door opener, you can refer to the user manual or contact Chamberlain customer support.

By following these simple steps, you can easily program your Chamberlain garage door opener and enjoy the convenience of remote access to your garage.