Broken Garage Door Spring Repair

Garage door springs are important components that help to lift and lower the door smoothly. When a spring breaks, it can make the door difficult or impossible to open or close. If you find yourself with a broken garage door spring, it's important to take action to repair it as soon as possible. Leaving a broken spring unattended can lead to further damage to the door or even injury to yourself or others.

There are two main types of garage door springs: extension springs and torsion springs. Extension springs are located on the sides of the door and stretch when the door is opened. Torsion springs are located above the door and twist when the door is opened. Both types of springs can break, but extension springs are more likely to break than torsion springs.

If you're not sure what type of spring your garage door has, you can usually tell by looking at the door. Extension springs are typically visible on the sides of the door, while torsion springs are hidden above the door. You can also check your garage door owner's manual to find out what type of springs your door has.

Once you know what type of spring your garage door has, you can start the repair process. If you're not confident in your ability to repair the spring yourself, it's best to call a qualified garage door repair technician. However, if you're handy and have some basic tools, you may be able to repair the spring yourself.

To repair an extension spring, you will need to:

Gather your tools. You will need a pair of pliers, a screwdriver, and a hacksaw.
Safely support the garage door. This can be done by placing a jack or a pair of sawhorses under the door.
Remove the broken spring. To do this, you will need to use the pliers to remove the cotter pins that hold the spring in place. Once the cotter pins are removed, you can use the screwdriver to remove the spring.
Install the new spring. To do this, you will need to insert the new spring into the bracket and secure it with the cotter pins.

To repair a torsion spring, you will need to:

Gather your tools. You will need a pair of pliers, a screwdriver, and a hacksaw.
Safely support the garage door. This can be done by placing a jack or a pair of sawhorses under the door.
Remove the broken spring. To do this, you will need to use the pliers to remove the cotter pins that hold the spring in place. Once the cotter pins are removed, you can use the screwdriver to remove the spring.
Install the new spring. To do this, you will need to insert the new spring into the bracket and secure it with the cotter pins.
Adjust the torsion spring. To do this, you will need to use the pliers to turn the adjusting screw until the door is balanced.

Once you have repaired the spring, you should test the door to make sure it is working properly. Open and close the door several times to make sure it is moving smoothly and without any noise. If the door is not working properly, you may need to adjust the spring tension or call a qualified garage door repair technician.