Wayne Dalton Garage Door Bottom Seal Replacement

If your garage door's bottom seal is damaged or worn, it can let in drafts, dirt, and moisture. This can lead to higher energy bills, a less comfortable garage, and even damage to your garage door and opener. Replacing the bottom seal is a relatively simple and inexpensive repair that you can do yourself with a few basic tools.

Tools You'll Need

To replace the bottom seal on your Wayne Dalton garage door, you will need the following tools:

Phillips head screwdriver

Pry bar

Utility knife

New bottom seal

Step-by-Step Instructions

Follow these step-by-step instructions to replace the bottom seal on your Wayne Dalton garage door:

Unplug the garage door opener. This will prevent the door from opening or closing while you are working on it.

Open the garage door manually. Use the handle located near the bottom of the door to lift it open.

Locate the old bottom seal. It will be attached to the bottom of the door with screws.

Remove the screws that are holding the old bottom seal in place. Use the screwdriver to remove the screws.

Pry the old bottom seal away from the door. Use the pry bar to carefully pry the old seal away from the door.

Clean the area where the new bottom seal will be attached. Use a damp cloth to clean the area where the old seal was attached.

Apply a bead of silicone caulk to the bottom of the door. Use a caulk gun to apply a bead of silicone caulk to the bottom of the door.

Install the new bottom seal. Align the new seal with the bottom of the door and press it into place. The seal should be flush with the bottom of the door.

Screw the new bottom seal into place. Use the screws provided with the new seal to screw it into place. Be sure to tighten the screws securely.

10.

Plug in the garage door opener. Plug the garage door opener back into the power outlet.

11.

Open and close the garage door to test the new bottom seal. Make sure that the door opens and closes smoothly and that the seal makes a good seal with the floor.

Tips

Here are a few tips for replacing the bottom seal on your Wayne Dalton garage door:

If the old bottom seal is difficult to remove, you can use a utility knife to cut it away from the door.

Apply a liberal amount of silicone caulk to the bottom of the door before installing the new seal. This will help to create a good seal and prevent drafts.

Test the new bottom seal by opening and closing the garage door several times. Make sure that the door opens and closes smoothly and that the seal makes a good seal with the floor.