How To Open Garage Door With Broken Spring

A broken garage door spring can be a frustrating problem, but it's one that can be fixed relatively easily. Here are some tips on how to open a garage door with a broken spring.

1. Safety First

Before you begin working on your garage door, it is important to take some safety precautions. Disconnect the power to the garage door opener so that it does not accidentally open while you are working on it. Wear gloves and safety glasses to protect yourself from any potential injuries.

2. Find the Broken Spring

The first step is to find the broken spring. The springs are located above the garage door, and they are attached to the door with cables. If you look at the springs, you should be able to see which one is broken.

3. Remove the Broken Spring

Once you have found the broken spring, you need to remove it. This can be done by disconnecting the cables that are attached to it. Once the cables are disconnected, you can remove the spring from the door.

4. Install the New Spring

The next step is to install the new spring. This is done in the same way that you removed the old spring. First, attach the cables to the new spring, and then install the spring on the door.

5. Test the Garage Door

Once the new spring is installed, you need to test the garage door to make sure that it is working properly. Connect the power to the garage door opener and open and close the door a few times. If the door is working properly, then you have successfully replaced the broken spring.

Tips

Here are a few tips that may help you when you are replacing a broken garage door spring:

If you are not comfortable working on your garage door, you can hire a professional to do it for you.
Be sure to wear gloves and safety glasses when you are working on your garage door.
Disconnect the power to the garage door opener before you begin working on it.
Find the broken spring and remove it.
Install the new spring.
Test the garage door to make sure that it is working properly.