How To Repair Garage Door Springs

Garage door springs are an important part of your garage door system. They help to lift and lower the door, and they can break over time. If your garage door springs break, you will not be able to open or close your door. That's why it's important to know how to repair them.

Types of Garage Door Springs

There are two types of garage door springs: torsion springs and extension springs. Torsion springs are located above the door, and they are wound up when the door is opened. Extension springs are located on either side of the door, and they are stretched when the door is opened.

How to Repair Torsion Springs

To repair torsion springs, you will need to first remove the door from the tracks. Once the door is removed, you can access the springs. To remove the springs, you will need to use a pair of spring winding bars. These bars are inserted into the springs, and they are used to wind the springs down.

Once the springs are wound down, you can remove them from the door. To install the new springs, you will need to wind them up in the opposite direction. Once the springs are wound up, you can reattach them to the door.

How to Repair Extension Springs

To repair extension springs, you will need to first remove the door from the tracks. Once the door is removed, you can access the springs. To remove the springs, you will need to use a pair of pliers. The pliers are used to grip the springs, and they are then used to pull the springs off of the door.

Once the springs are removed, you can install the new springs. To install the new springs, you will need to stretch them out. Once the springs are stretched out, you can reattach them to the door.